Living Museum of the Great Western Railway

Home » BLOGS - Going Loco

Going Loco

BLOG - A closer look at our collection of historic locomotives

With a collection of locomotives dating from Victorian times to the 1960s, there's plenty to discover.

 

Latest Blogs


FRIDAY 18 JUNE

Yorkshire Gold in a Didcot Mirror

No 29 in action on the North Yorkshire Moors Railway - photo couresy of Philip Benham

We are sometimes lucky to get interesting locos visiting Didcot Railway Centre. There have been a myriad of different machines over the years. The first was No. 4079 Pendennis Castle when the society held its first open day at Taplow in 1965. She was made a permanent part of our collection in 2000 and thus she no longer counts as a visitor! This year we are lucky enough to have a very unusual visitor in the shape of the lovely ‘Lambton Tank’ No. 29 from our friends at the North Yorkshire Moors Railway (N.Y.M.R.). The ‘Lambton Tank’ has a number of facts about her that we can match with locos in our collection so let's hold up the Didcot mirror and see what reflects back!

The ‘Lambton Tank’ (more accurately named either Lambton Colliery Railway No. 29 or Lambton, Hetton & Joicey Collieries No.29 - after some mergers in 1910) is named after its original home, the Lambton Colliery* in County Durham. Coal had been extracted from the area as far back as the 1600s. It became a big industry by the 1780s and was an early adopter of railway type technology. As far back as the 1730s, horse drawn tramways were used to move coal. In 1819, a private tramway was purchased and added to the system. This provided a link between their system and a line that once ran between Bournemoor and Philadelphia. This got them access to the River Wear which in turn got them access to the Port of Sunderland.

Although it began using steam locomotives in 1814, some sections of the route were too steep for the early engines and so the wagons had to be hauled up and down them by stationary steam engines that used a rope and a massive winch. By the 1860s there were over 70 miles of track in the system. Running rights for trains to pass over it hauled by engines of the North Eastern Railway were now in place and this secured the transport of Lambton coal to the rest of the world. By the 1880s steam locomotives were used throughout, the rope worked inclines being removed.

Didcot Mirror #1 - Working in a Colliery.

Several of our engines have links to working in a colliery and coal traffic but two have history close to the industrial life of No. 29. No. 1340 Trojan who worked at the Netherseal colliery at Burton-on-Trent, Derbyshire during WWII. See my blog post Return of the Little Warrior (16/04/21) Pannier Tank No. 3650 also saw out its final operational years with Stephenson Clarke Limited who were a private colliery operator at Gwaun-cae-Gurwen in South Wales. The first ever Going Loco blog from (27/3/20) features this very subject!

3650 in the ownership of Stephenson Clarke PD fuels Ltd at Gwaun-Cae-Gurwen open cast pit - from a slide by R.Monk, 21 April 1966

The older and smaller 0-6-0 locomotives on the line were beginning to struggle with the increasingly heavy loads on the railway by 1900. As a result, a programme of modernisation of the fleet began. They turned to Kitson & Co. of Leeds, West Yorkshire. They specified an engine type that was synonymous with the coal industry. The 0-6-2 wheel arrangement was used extensively in the Welsh Valleys, and by the London, North Western Railway on their appropriately named ‘Coal Tank’.

Lambton No 29 with a demonstration goods train on the NYMR - Photo courtesy of Ray Brown

Didcot Mirror #2 Built By Kitson & Co.

The Kitson company that built No. 29 in 1904 also built No. 1338 in 1898. See my Cardiff Connection Blog (14/05/21) on this engine for details.

At just under 60 tons, this engine was quite a beast! A 165 psi boiler, two inside 19 inch diameter x 26 inch stroke cylinders, slide valves operated by Allen straight link gear and 4 foot 6 inch driving wheels made for a potent package. It had a Tractive effort** of 23,500 lbf. To give that context, that's about the same power output as No. 2999 Lady of Legend! Ok, she won't go as fast as No. 2999 but this engine didn't need to!

Didcot Mirror #3 Tractive effort

No. 29 has almost the same Tractive effort as No. 2999& Lady of Legend. Is that cheating? It is a bit I suppose! How about this one then:

Didcot Mirror #4 Allen Straight Link Valve Gear.

This method of operating the valves on a steam locomotive wasn't common in the U.K. but, just like No. 29, No. 1363 has this same system. I have written about No. 1363 twice. The Big 13 - Lucky For Some? (24/04/20) and 1363 - Survivor Extraordinaire (12/06/20).

The new loco was No. 4263 in Kitson's order book but it was numbered No. 29 when it arrived at the Lambton Railway. The railway ended up with a few 0-6-2s that were very similar to No. 29 from various sources including Robert Stephenson & Co. and some ex. Taff Vale / Great Western machines as well. It spent the majority of its working life operating trains between the pit heads near Philadelphia and the coal staithes at the Sunderland end of the line.

Didcot Mirror #5 The 0-6-2 Wheel Arrangement

The 0-6-2 wheel arrangement was a Welsh favourite. It was so common on the railways that when the GWR absorbed railways in the area, they designed and built their own! Our example is 56XX Class No. 6697 of 1928.

No. 29 continued in service until almost the end of the County Durham coal field. The coal industry was nationalised in 1947 and the National Coal Board commenced closures of sections of the system in the early 1950s. With the end of the local coal industry in the late 1960s, the writing was on the wall for No. 29. In a move typical of the nationalised industries of the time, she returned to traffic from a full overhaul in October 1968 and was withdrawn from service and placed in store at Philadelphia on the 15th February 1969. Tax payer’s money at work...

Didcot Mirror #6 The ‘Unwanted’ Class 14

This almost wanton consumption of money wasn't restricted to the National Coal Board. British Rail ordered a whole heap of brand new diesel locomotives off the drawing board which either didn't work or were designed for a task that no longer existed. Our Class 14 No. D9516 was built as one of 56 of its class in 1964. They were all withdrawn by 1968...

Fortunately, No. 29 came to the attention of some volunteers from the N.Y.M.R. Along with No. 5 (one of the Robert Stephenson & Co. 0-6-2s of 1909), the ‘Lambton Tank’ was purchased and made its way to the nascent N.Y.M.R. It has been in service with them on and off ever since. The biggest challenge she faced was in October 2014 when cracks were discovered in her cylinder block. This needed complete replacement but this redoubtable survivor was repaired and was running again by 2019. We are now lucky to give her a holiday and the full ‘Didcot Experience’. So, if you'd like a new perspective on this fascinating machine, come and see her operating up close. She will be with us until the August Bank Holiday - to see when she's due to run, check our Locomotive Roster.

Didcot Mirror #7 Robert Stephenson & Co.

Ok, at bit of a stretch but hear me out! No. 29s ‘sister’***, No. 5 was built in 1909 by Stephensons. This company merged in 1937 to become Robert Stephenson & Hawthorns. In 1944 they became part of English Electric. In its various forms, this company and its parent built No. 1 Bonnie Prince Charlie in 1949 AND the traction motors fitted to Class 08 No. 08 604 Phantom.

Crikey - all this linking stuff together is hard work! Thanks to Harry Pettit and Graham Hukins for top suggestions! There has been a fair bit of mental gymnastics going in here to make this work... It's addictive though. I think I realise why these silly conspiracy theories get started. Now, if I can just link Alpha Centauri, the lifting shop at Didcot and my sandwiches from last Saturday, I think I can prove they were abducted by aliens. I won't be a minute...

*Named after the nearby Lambton Castle. The Lambton Family that lived there were a major part of the organisation.

**A measure of an engines pulling power. See my blog ‘Working This Out is a Real (Tractive) Effort’ (12/02/21) for a full explanation.

***Possibly more of a close cousin or perhaps a ‘sister from another mother’ as they share a very similar design but weren't built by the same company?


FRIDAY 11 JUNE

Luxurious Saloons? Super!

The Great Western Magazine of January 1932 included this photo showing the interior of one of the Trollope saloons

The G.W.R. always saw itself as something special. It had a way of doing things that set it apart in many ways from its contemporary railway companies. They always tried to make it look that way too. They often catered to people of considerable means or, to put it another way, the completely rich! We have a few vehicles that come under this remit in the collection at Didcot. In the first of an irregular, occasional and when your blogger remembers(!) series on the luxury passenger vehicles in the fleet, we will today take a look at the Super Saloons.

The short-lived Torquay Pullman hauled by a Castle class locomotive. Photograph - A L P Reavil

Taking people to and from ships was a staple of the G.W.R.'s business from day one. In fact, allied with Brunel's great ships, the idea was to offer a complete travel service from London to New York. An idea too far ahead of its time but you can't fault the ambition and foresight...

Post WWI, with the emergent nouveau-riche of the period, this dream sort of came to its zenith. Although the original intention had been to offer this type of service from London to Bristol*, Plymouth became the focus of the traffic. In doing so, there was always the desire to cater to the first class passengers off the ships. The master of luxury travel in the U.K. at the time was the American Pullman company and this is where the majority of the railways went for their most luxurious trains. It was run on a sort of ‘franchise’ basis. Pullman supplied their own cars** and staff and these were used by the various railway companies. The G.W.R., being the G.W.R. however, wasn't convinced. They had always had high standards of vehicles in first class and considered that their level of luxury was luxury enough.

No 9111 King George on display at Paddington when new

This notwithstanding, the G.W.R. still gave Pullman a chance to prove themselves. A seven coach set was leased in 1929 but it wasn't successful and the lease was terminated in 1931. There are many reasons why this didn't work - the biggest of which was of course the Great Depression. Despite the economic downturn, Chief Mechanical Engineer Charles Benjamin Collett tasked the coach designers at Swindon with having a go at building a better Pullman coach. As a result of the G.W.R.'s broad gauge history, their vehicles could be built wider than the vehicles of any the other U.K. railways. The plan that was drawn up was 61 feet 4.5 inches (18.707 m) long and 9 feet 7 inches (2.92 m) wide. In order to assist in going round curved track, the end doors were placed on short sections at each corner that were angled inwards at 30 degrees from the coach sides and the ends were of a bow shaped design. This did limit their sphere of operations but as they were only ever intended to run on the G.W.R.'s main routes, that wasn't an issue.

There were only 8 of these vehicles built which were completed by 1932 under lot No. 1471 to diagrams G.60 & G.61. They were all named after members of the royal family thusly: No. 9111 King George, No. 9112 Queen Mary, No. 9113 Prince of Wales, No. 9114 Duke of York, No. 9115 Duke of Gloucester, No. 9116 Duchess of York, No. 9117 Princess Royal and No. 9118 Princess Elizabeth. The thing that made them luxurious of course was their interiors. The first two were built under diagram G.60 and this denoted that their interiors were designed and built by the prestigious furniture makers Trollope & Co. These two have beautiful French-polished light-coloured walnut, with book-matched burr veneer panels on the interior sliding doors. The ceilings are also a thing of great craftsmanship, looking like it's been borrowed from a stately home! The problem with this sort of work is that it is REALLY expensive and the craftsmen at Swindon known as the ‘Saloon Gang’ were tasked with fitting out the other 6 under diagram G.61. These coaches featured French polished dark English walnut, with gold-leaf hairlines outlining the panelling. In all the coaches the seating is amazing. They comprise fold down tables that connect to the coach walls and plush, free standing wing-back chairs. These were arranged with an average of 26 in the main saloons and 4 in the private Coupé. There was a toilet fitted at each end of the coach.

One of the saloons converted with a kitchen, 9117 or 9118, being stocked with refreshments at Paddington station in the early 1960s

In 1937 the coupé and one lavatory were removed and a small kitchen fitted in their place in Nos. 9117 & 9118. This was due to the fact that a non - super saloon kitchen vehicle had to be used in the super saloon trains which kind of wasn't the point! The kitchen preserved in No. 9118 is amazingly still completely intact and as it was when fitted. The only type of coach that wasn't built was a brake coach with a guard's compartment. These were usually provided by a pair of full brake^ vehicles. Due to their higher than normal weight, they were used more often as either as one or two added to a train of regular vehicles or as an exclusive train of 3 saloons and two or three full brakes for the passenger's luggage. To travel on the Super Saloons, you had to buy a full first class fare and then pay a 10 shilling supplement. To put that in a modern context, a first class fare from Paddington to Plymouth today is £194.00. 10 shillings from 1935 in 2021 is worth about £25. So our hypothetical modern Super Saloon fare is £219 for a one way ticket. The average 1935 wage in modern money is very roughly the equivalent of £500 per month...

Three of the saloons on the back of a Newbury Races special, photographed at Langley in 1962 by Mike Peart

The move of the boat traffic from Plymouth to Southampton lightened their workload so, as well as the Ocean Liner Express duties, they became regulars on dining trains to Newbury Races and as private hire vehicles. They were always kept at the bottom end of the Carriage Shed at Old Oak Common. This was close to the offices (and therefore the eyes) of the coach inspector who ensured that they were maintained in immaculate condition ready for special journeys at a moment's notice. This is how they saw out their service. They lost their names when repainted into the British Rail Crimson and Cream livery in the early 1950s and they were eventually withdrawn in the B.R. version of the G.W.R.'s. Chocolate & Cream livery in the early 1960s with the last Super Saloon Ocean Express being run in September 1962.

A special journey for two of the saloons with Great Western Society members boarding them at Reading to travel to the AGM at Bristol in 1966. BR arranged for the saloons to be coupled to the rear of the 9.45 am from Paddington to Bristol for members to ‘road test’ them and decide whether they were to their liking for preservation. The fare charged each member was a 2nd class day return

Out of the total of 8 saloons built, remarkably 5 have survived. Nos. 9111 & 9116 are restored and in service with our friends on the South Devon Railway. We have Nos. 9112, 9113 & 9118. Our trio is the subject of a very long term restoration project. Reaching Didcot in 1976, by the end of the 1980s time had started to catch up with them and they were all out of service with us by the early 21st Century. The restoration of No. 9113 is a fair way along. As a ‘standard’ (!) super saloon, this one was chosen to be done first. Next on the list will be No. 9118 and its kitchen, leaving that exciting and very complex interior on No. 9112 as the final serving. It represents quite a challenge! It is hoped that in the not too distant future, visitors to Didcot will be able to marvel at the incredible craftsmanship^^ and period design of No. 9113 Prince of Wales and get just a small taste of what life for the 1930s equivalent of today's ‘one percenters’ was like.

The Great Western Society’s Vintage Train at Paddington with saloons 9118 and 9112 in the mid 1970s

Pretty cushy if those chairs are anything to go by...

Jessica Raine and David Walliams filming Partners in Crime in No 9112 at Didcot in 2015. The scene was set in Paris, hence the SNCF antimacassars on the seats

 *This is where a goodly proportion of the money to build the G.W.R. in the first place came from.

**The Americans use the word ‘Car’ to describe the vehicles pulled by locomotives on the railway. Passenger Cars = Coaches and Freight Cars = Wagons in the U.K.***

***The fact that one of the initial investors in the London Underground was an American means that on their trains, the passenger vehicles are called cars and not coaches. I don't know if that's relevant or even interesting, but it is true...

****Yes - the Paignton from the Paignton and Dartmouth Railway! A.K.A. Where blue kings like to go on a summer holiday.

^A passenger coach shape on the outside but with luggage / parcels / newspaper / other similar stuff storage spaces instead of seats and a guard's compartment inside.

^^Not forgetting of course the incredible restoration talents of our Carriage & Wagon department. They create exquisite art with timber while the loco department use wood to light fires...


FRIDAY 4 JUNE

There is a large part of our restoration of rail vehicles - be they locomotive or carriage and wagon - often overlooked but it is obvious when you think about it. The wheels. They are literally and figuratively the foundation of every restoration. There is however a lot to a wheel. Let's roll out...*

We'll start with a bit of anatomy. Every rail vehicle will have at least two wheel sets. This will comprise of an axle with a wheel on each end. There are the hubs in the middle then the wheel centres. The tyre is on the outside and in most cases in the steam age, these were replaceable. Strange but true! We’ll talk more about that later.

A restored Mansell wheel under coach 290 at Didcot

The wheels themselves are a work of engineering art. There are many types of wheel. The simplest being a disc. Most coach wheels in the collection are of these type. There are outliers here in that there are also the beautiful Mansell wheels. These have steel centres and rims but a hardwood section** in between. The idea being to use it as a damper to reduce noise - particularly in 4 and 6 wheel coaches. These had a far more rigid connection between the wheels and suspension and the body of the vehicle than a more modern vehicle where the wheels are on separate little trucks called bogies. Anything you can do to reduce the vibration and noise is a good thing. There are other oddities such as the Bulleid Firth Brown, which have a number of cut outs to reduce their weight. These are synonymous with the Bulleid Pacifics and the Q1 Austerity 0-6-0s of the Southern Railway.

Duke class No 3253 Pendennis Castle, sporting Mansell wheels on the bogie and tender

The other main type is the spoked wheel and this is the type we see on the majority of U.K. steam locomotives. The idea is obviously older than the railways as it was seen on horse drawn vehicles for centuries beforehand. The process for making them was fascinating and through a remarkable set of images we can show you how they were made. The photographer was a guy called Walter Nurnburg. He was born in 1907 and after art school in Berlin, he moved to London in 1933. Although declared an enemy alien in 1939 - having all his cameras confiscated in the process - he ended up joining the British army in 1940 and was invalided out on medical grounds in 1944. His style of photography lent itself to industrial subjects and he found a living in this area post WWII. He became fully British in 1947 and at his death in 1991, he had also been a teacher of photography in the Guildford School and the Polytechnic of Central London and received an O.B.E. for his life's work.;

In January 1948 he visited the newly nationalised Swindon Locomotive Works. This album of photos was discovered by our provider of photographs, Frank Dumbleton. He told me that:

“There was an album of his photos in the publicity office at Paddington and one day when I was in there I was given the album, otherwise it would have gone in the bin

 

In doing so, he preserved some absolute gems. We even have the names of the guys working too!*** The first image shows pattern maker Mr. A. A. Taylor constructing a wooden pattern for a large driving wheel. This is where all large metal castings start. The wooden pattern is made to a very high level of precision and is in fact a small amount larger than the finished item. This is to take account of shrinkage. When metal is heated, it expands and if it is heated to the point of becoming a liquid, it’s done a fair bit of expanding. As a result, the measuring instruments in the pattern shop were scaled. A separate set for making things in brass, cast iron, steel. Different metals expand different amounts. A mould made of special casting sand is made around the pattern and the pattern is lifted out leaving the negative space to be filled by the molten metal.

Once the wheel was cast and machined, the axle would have been pressed into place. This involved a press with a huge amount of force behind it as the fit is incredibly tight. A large square key way was cut into a section of the circumstance where the wheel and axle meet and a square ‘key’ was driven in to prevent it turning. This was done with a really serious two man air hammer and we have one in the works at Didcot. We call it Mjollnir...

The next job would be to fit the tyres. Unlike your Goodyear or Dunlop products, the local garage can’t put their’s on - it needs heat and lots of it. A special circular forge with burners all the way round was employed to expand the steel tyre to a point where the wheel casting will drop into it. It then cools and as it does it contracts, gripping the wheel. The above picture shows shrinkers Mr. J. Barnard, Mr. H. Phillips and Mr. H. Barkham, fitting the Gibson ring to a wheel after shrinking on the tyre. The Gibson Ring being the locking ring for the inside of the wheel. Once the tyre was worn, it would be thick enough to be put back into the lathe and turned again to restore the flange - important as it keeps the vehicle in the track! When the tyre got too small, it was cut off and a new one fitted. There were two profiles of flange. The thick one was the standard and used on most wheel sets. There was a thin profile too and this was used where a long wheelbase might cause wear round tighter corners. An example is the middle driving wheels of the G.W.R. 4-6-0s.

Here we see a rather unimpressed fitter Mr. B. Morkott, building a Castle class crank axle. He just wants to get rid of Walter and get on with his job by the look of him! He is using the super strong press to push together the components for the inside crank on an axle. If you have cylinders between the frames, as many G.W.R. classes did, the piston transmits its drive through this crank. The bits sticking up are to prevent him pushing the bits too close together and the big section he has his hand on is the counterweight for the mass of the connecting rod. The stub axle sticking up will eventually get a wheel on it.

Here we see fitter, Mr. A. E. Kirk, balancing a wheel. The wheels can be many tons in weight - a front crank axle driving wheel set for a Castle is about 5 tons. All that rotating mass needs to be well balanced. If it wasn’t, the vibrations could do serious damage to the locomotive. The machine that Mr. Kirk is using is the one used to measure the vibrations and to tell the fitters where to add balance weight. This is the same job as is done with a car tyre only a lot bigger. And yes, that is an unguarded loco driving wheel spinning at high speed within 2 feet of his left ear...

Mr. F. Austin, also a fitter, is melting lead into a wheel balance weight. If you think about the way a loco driving wheel works, there are a lot of forces acting upon it. The weight of the wheel isn’t the whole story. If you have a connecting or coupling rod connected to it, this too creates an imbalance. This is why there are the large balance weights on the driving wheels of steam locomotives. There are often different size weights depending upon what parts are connected to them. A smaller weight usually means that it’s just a coupling rod. A larger weight could mean that it will have connecting and coupling rods on them. The bigger the offset masses are, the bigger the counterbalance needs to be.

So there we are - wheels. A seemingly simple thing with many facets to their construction, operation and maintenance. Today we employ even more technology in the use of ultrasonic and magnetic particle testing to look for cracks in wheels and axles. Back in the day this was done with a hammer and a good ear. Tap the wheel and it rings true, no cracks. If you get a dull ‘thunk’ type noise, the vibrations of the hammer blow don’t travel round the wheel easily and get filled as they can’t make it over the crack. Time has moved on but the techniques used to make these wheels remains the same. No. 2999 Lady of Legend, No. 1014 County of Glamorgan and No. 6023 King Edward II all have at least one set of new wheels under them. All made in the traditional way, checked with modern techniques and enjoyed by as all just the same as the originals!

The original rear driving wheels of 6023 King Edward II were cut after a derailment at Woodham Brothers Scrapyard at Barry necessitating the casting of a new pair as part of the locomotive's restoration

6023 complete with new wheels recreates a timeless scene in the Engine Shed at Didcot

*With apologies for the pun and to Optimus Prime for borrowing his catchphrase.

**Usually Teak. Due to the hardy nature of the wood, the segments were often reused as flooring after use in wheels.

***I wonder if any of my readers have relatives in these pictures? It would be amazing to find some!


FRIDAY 28 MAY

Ancient Artefact - Part 2

So last time we left little No. 1963 - a.k.a. ‘Shannon’, pottering around Crewe Locomotive Works. A change was about to happen to the engine that was to take it from this industrial powerhouse to a rural idyll. Read on ….

No 5 with a passenger train on the Wantage tramway

Remarkably, rather than being scrapped, ‘Shannon’ was sold on again at the end of her service with the London & North Western Railway in 1878. This time she was about to become part of the thing she was most famous for, the Wantage Tramway. The Wantage Tramway Company (W.T.C.) was established in 1873 and its reason for being was to transport passengers and goods from the GWR's station, Wantage Road, to the town of Wantage itself which was about 2½ miles from the station. The old trick of stating that a station was sort of near a place it was supposed to serve by adding the word ‘Road’ afterwards was common practice in those days and could mean a long walk for the uninformed!

No 5 poses with a single tramcar on the Wantage Tramway

The line was built to standard gauge (4 feet 8½ inches or 1,435mm) as it was built after the gauge commission decreed that no new lines could be built to the GWR's broad gauge (7 feet 0¼ inch or 2,140mm). The line opened in 1875 and started at Wantage Road station on the Didcot to Swindon section of the GWR main line. Here there was a passenger siding and eventually a connection to the goods yard of the GWR. It then followed what is now the A338* there was a halt** at Oxford lane, a passing loop to allow trains to pass each other at Gypsy Lane, another halt at Grove Hill, a second loop at where it met the Wilts and Berks Canal and then it triumphantly marched into the great metropolis that is Wantage.

The Wantage Tramway was built neither for comfort nor speed and was often the butt of jokes with its fleet of secondhand vehicles

Originally, its horsepower was exactly that - horses! The wagons were moved from place to place by horses. It was initially a place that welcomed experimentation using both a steam powered tram designed and built by engineer John Grantham and a less successful pair of pneumatically powered tram cars designed by a Polish Frenchman by the name of Louis Mékarski.*** Afterwards it became synonymous with the use of old railway equipment. Its passenger coaches were converted trams. Goods wagons were more often than not the ones delivered to them by the GWR and the locomotives were a really motley crew of different types. Nos. 1, 2, 4 and 6 were tram engines, No. 7 was a Manning and Wardle 0-4-0 saddle tank that came from the Manchester ship canal. No. 3 is unknown - that's right! This one slipped through the historical cracks and we have no idea as to what it was! Which leaves us with No. 5...

This was our engine, ‘Shannon’. She arrived in 1878. The amazing thing is that she got there under her own power. Imagine the little 0-4-0 who could only carry 250 gallons of water and ½ ton of coal going from Crewe in Cheshire to Oxford and then on the GWR to Wantage. It's about 150 miles! A long journey for a such a little engine. She saw out the rest of her working life here. Pottering up and down the short line and yet again endearing herself to all she met. She was known to the locals as ‘Jane’. She was overhauled and repaired by Swindon for the WTC a number of times. Highlights include new cylinders fitted in 1882 and overhauls in 1896 and 1921. A change to Avonside**** of Bristol in 1929 and a final return to Swindon in 1939. And that's it. Any other small repairs were done on the railway. The advantage of this is that she has changed very little over the years unlike many of our GWR machines.

Fortunately No 5's light weight meant that rerailing could be accomplished using jacks following this unplanned excursion!

The WTC did well in the pre WWI environment but after the Great War, the proliferation of road vehicles - particularly the ex-army ones - started to bite into their profits. The 1st of August 1925 saw the end of passenger services but it was the Second World War that ended the goods services. The massive amount of road traffic did all kinds of damage to the track and it simply became uneconomic to repair it. As a result the last train ran on the 22nd December 1945.

This should have been the end but the engine managed to charm even the normally stone faced GWR. They bought her for £100 and she went back to Swindon again. Restored with the name ‘Shannon’, she was put on display on the platform of Wantage Road Station. There she stood for 17 years until 1965 when the station closed. By this time, her historic importance had been realised and in order to secure her as part of the UK's National Collection, she was moved to somewhere safe. How about the grounds of the Atomic Energy Authority? Safe Enough?

Between Wantage and Didcot on 18 January 1969, No 5 photographed by Angus Davis standing on the front passenger side of a Hillman Imp with his head and camera through the sunroof!

Nuclear grade security is all well and good but it's not really a railway is it? It's not the rural idyll or historic industrial setting you first think of when placing a 1857 steam locomotive... These were exactly the thoughts of a couple of Great Western Society members who happened upon ‘Shannon’ in her bizarre circumstance. A chat with the National Collection about ‘the lovely engine shed that we now have and - oooh, how cool would it be to see it run again?’ began.

After positive discussions with both the National Collection and Wantage Council (who were originally looking to see her installed in their town), Didcot became her home. And she did run again. Well, couldn't not really could we? So after two year's work she felt fire in her belly once again in 1968. She managed to attend the amazing Stockton & Darlington 150 celebrations in steam and took part in the grand parade of 1975.

Setting off to the 1975 S&D grand parade, No 5 is loaded onto a wagon in the lifting shop at Didcot

Before setting off to Shildon for the Stockton & Darlington celebrations we decided it would be prudent to retube the boiler, as the age of the tubes was unknown. That revealed an unpleasant discovery as reported in the June 1975 GWS newsletter:

“When first brought to Didcot, there were legends of a crack in the firebox but despite much investigation no trace could be found. Upon removal of the top row of tubes, the firebox tubeplate sprung to reveal an old crack across the top row of ligaments. Although previously welded up, considerable care had to be exercised in replacing the top row.” The boiler inspector, an old BR hand with decades of experience, advised us to dress the crack with a hammer and chisel, and he would then give the boiler a year's certificate to get it through the grand parade.

The delicate operation to unload No 5 at Shildon

On the day of the grand parade in 1975, No 5, the smallest and oldest engine taking part, is behind Princess Elizabeth, the largest locomotive on parade

The final bit of history - other than continuing to charm the visitors that see her(!) is that a static restoration was carried out in 2017. During this, a bit of forensic sanding amazingly revealed original W.T.C. lettering under many coats of paint and this was fully recorded and sealed before the top coat of the earlier W.T.C. Red livery was applied.

No 5 cosmetically restored to Wantage Tramway colours continues to delight visitors to Didcot

Of all the locomotives produced by George England & Co., ‘Shannon&rsquo ;and the four at the Ffestiniog Railway are the only ones left, which makes ‘Shannon ’ the only standard gauge survivor. Not only that but she was built at a time when the GWR had been running trains for less than 20 years! It certainly ranks fairly well in the list of oldest surviving steam engines anywhere in the world. The fact that it is still with us is nothing short of miraculous. That we at Didcot get to look after her and show her off to the public is a real privilege.****.

*Back in the day it revelled in the excellent name of the Besselsleigh Turnpike. We've lost something calling it the A338 haven't we? I'm sure it's nice and efficient but still...

**Halt = A& really small station.

***More details here:

https://en.m.wikipedia.org/wiki/Mekarski_system

****Thanks National Collection!


FRIDAY 21 MAY

Ancient Artefact - Part 1

In our journey through the 0-4-0s in the shed we find ourselves (virtually) stood in front of one of the most remarkable survivors we look after at Didcot. The Venerable Wantage Tramway Company's (W.T.C) No. 5. We are going to have to build a big fire in the boiler of our time machine for this one - it's a long way back...

No 5 ‘Shannon’ outside the Engine Shed at Didcot - 1 May 2021

George England was born in about 1811 in Newcastle-upon-Tyne and moved to Deptford, London to train as an engineer when the time came. This was at the John Penn Boilerworks and Shipyards. The first time he really makes his mark on the world of engineering is in 1839 when he received a patent for a new type of traversing screw jack. Not unlike a set we have at Didcot. These have a ratchet driven screw which performs the lifting action and another screw thread that moves the jacking section left or right. These were once standard equipment on many steam locomotives and were used to put them back on the track - the up and sideways motion being very useful!

George England & Co. was set up in 1839 and built locomotives for a wide range of different railways. Not only our beloved G.W.R. but also the Caledonian Railway, the London Brighton and South Coast Railway, the Somerset and Dorset Railway and, in far flung Australia, the Victorian Railway.* Their most famous products are perhaps the engines of the Ffestiniog Railway. The diminutive 0-4-0s have become synonymous with the line along with something else pioneered initially at the firm. George England met Robert Fairlie in 1860 who began working as a consultant engineer for the company.

The Ffestiniog Railway's Prince in Boston Lodge works, September 2019, built by George England & Co in 1863

He also eloped with George's daughter... This ended up in court as England alleged that Robert Fairlie had forged a document to allow Eliza to marry him. For complex legal reasons, the judge threw the case out. To add to the drama, all his employees went on strike in 1865 over his poor treatment of them and despite them returning, lost orders meant that nobody really won that battle. Fairlie patented his unique twin bogie steam locomotive design in 1864 and the first was built in 1865 but the good salesmanship of England resulted in the order being placed by the Ffestiniog and the rest is history. England's retirement resulted in Fairlie taking over in 1869.** George England passed away in 1878.

The Ffestiniog Railway's Double-Fairlie ‘David Lloyd George’ at Porthmadog in September 2019. This is the most recent Double-Fairlie in the world, built at Boston Lodge in 1992.

Dropping back through the 19th century a bit, an order was given to Englands to build a little 0-4-0 well tank locomotive that was completed in 1857. She had an all up weight of just 15 tons, driving wheels that were 2’ 11” (0.889m) in diameter and two 9 in × 12 in (229 mm × 305 mm) cylinders. It had a boiler pressure of 120psi and coal and water capacity of 1/2 ton and 250 gallons respectively. Yours sir, for the princely sum of £800!*** The engine was built for the Sandy & Potton Railway which had been set up by Captain Sir William Peel V.C. K.C.B. R.N. Enough grandeur around that name? He was the son of Prime Minister Robert Peel - he of setting up the Metropolitan Police fame!

This drawing of ‘Shannon’ as built was published in The Locomotive magazine on 15 November 1905 in an article about ‘Shannon's’ history

This railway was a really local affair. The Great Northern Railway opened a station at Sandy, Bedfordshire in 1850. The attraction of connection to national markets for the produce grown in the area was very tempting and Captain Peel was most vociferous in gaining the support of local businesses to build it. He also did two other things. Gave the rights to allow the line to be built on his 1,400 acre (5.7 square kilometre) estate and he also offered to fund it too. Needless to say that a railway happened...

It cost him the mighty sum of £15,000 for over 3 miles of track. It didn’t require an act of parliament to build like most other railways as it was built on Peel's estate. The benefits were immediate. The produce traffic went from a £70 profit in 1853 to £500 in 1858. Passenger services commenced in 1857. Facilities were always quite basic but it did the job!

When our engine got there, it was named ‘Shannon’ after the ship H.M.S. Shannon. This was a Liffey Class steam frigate that Peel commanded. Peel sadly never saw his railway in action - he was killed while on duty. He was involved in landing a Naval Brigade and their guns ashore in the siege of Lucknow during the Indian Mutiny. During this action, no less than 5 Victoria Crosses were won including the first black recipient, Able Seaman William Hall****. During the second relief of Lucknow, Peel was injured during the action and subsequently caught smallpox and died. The line was purchased in 1860 to become part of the Bedford & Cambridge Railway and only met with closure as part of the national network in 1964.

In 1862, ‘Shannon’ became surplus to requirements and was sold on to the London & North Western Railway (L.N.W.R.) and given No. 1104. The initial idea was for her to run on the Cromford and High Peak Railway. This was a mainly industrial line that serviced the Peak District minerals traffic. It passed through some quite arduous terrain so it’s probably of no surprise that a little 15 ton 0-4-0 of ‘Shannon's’ ilk struggled and she was transferred to Crewe Locomotive Works to be used as a shunter - a job more in line with her stature. In 1872 she was renumbered again, this time to No. 1863.

Shannon’ has such a long history that I've had to split this one into a two parter! Next time we get to look at the Wantage Tramway, her years as a station ornament and her brush with nuclear power. Stay tuned!

*Engines designed in the Victorian era by a Victorian engineer, built by Victorian craftsmen to go work the Victorian era Victorian Railway. A Victorian victory perhaps?

**They must have patched things up - nice to have a happy ending!

***1857 money of course! A quick internet calculation reveals that’s nearly £93k today!

****He was also the first Canadian recipient - being from Nova Scotia.


FRIDAY 14 MAY

The Cardiff Connection

1338 in action on the main demonstration line at Didcot - September 2009

We had a chat about No. 1340 Trojan a few blogs back but there are a couple more 0-4-0 locomotives tucked away in the shed at Didcot. We will make our way through the list which comprises No. 1 Bonnie Prince Charlie, No. 5 Shannon and, the subject of today's blog - No. 1338. Like Trojan, we need to take a trip to another private manufacturer of steam locomotives. Instead of Avonside of Bristol, we head north to Leeds.

The company that built No. 1338 was established in 1835 by James Kitson and was based at Pearson Street in Hunslet. Kitson's partner in the enterprise was one Charles Todd. Todd had been apprenticed to a ‘founding father’ of the steam locomotive and leading industrialist of the time - Matthew Murray. A final partner in the form of David Laird, a rich farmer looking for investment opportunities, completed the early line up of the business and as a result the company was known at different times as Todd, Kitson and Laird, Kitson and Laird and Laird and Kitson.*

Lion in steam in 1961

One of their early products is amazingly still within us. The Liverpool and Manchester 0-4-2 No. 57 Lion was built by the firm in 1838 as one of a pair of ‘luggage engines’.** It went through a few rebuilds and ended up being withdrawn in 1857 and sold to the Mersey Docks and Harbour Board. In 1874 the engine was retired from work on the railway but was retained and modified to act as a steam pump at Prince's Dock. And there it stayed until it was ‘discovered’ by the Liverpool Engineering Society in 1923. It was sent to Crewe works in 1928 and restored to full working order as a railway locomotive. It has been a celebrity many times since - its starring role being that of the Titfield Thunderbolt in the film of the same name.*** Although no longer active, Lion still has a starring role being a key exhibit in Museum of Liverpool.

Lion and Evening Star at Didcot - 1982

Back to the plot. In 1842, Laird - who clearly wasn't getting the financial returns he had expected from the partnership - left and the company was joined by Isaac Thompson and William Hewitson. This saw a few more name changes through such combinations as Kitson, Thompson & Hewitson. The name changed again in 1858 when Thompson left (Kitson & Hewitson) and finally Kitson and Company after the death of Hewitson in 1863. They built locomotives for not just the UK but the world over and did so for just over a century. Almost every continent that had railways at the time seems to have seen a Kitson locomotive serve there. Sadly, the economic downturn of the 1930s along with the investment in a new and innovative method of propulsion that went nowhere**** caused them to cease to produce engines in 1938.

1338 passes the Coal Stage at Didcot with carriage 416 in tow - December 2010

Winding the clock back a bit, the other player in our story started as the trustees of the Marquis of Bute. They had operated the docks in Cardiff (known as the ‘Bute Docks’) since 1839 but they soon became overwhelmed by the sheer volume of coal traffic going through the port. Noticing that the railway companies around them were making large sums of money from this traffic, they decided that they wanted their own piece of that particular pie. So, being Victorians, they built their own railway. They however failed to make good friends and the railways that connected to them, over which they sometimes needed to run, weren't impressed. There were constant feuds between the Cardiff Railway (C.R.) as it became and its neighbours. This meant that it was always hamstrung, hemmed in by its competitors. It had just 120 miles of dock and colliery sidings and an impressive 11 mile long main line(!).

In 1898, our two stories collide as Kitson received an order for a pair of 0-4-0 dock shunting locomotives from the Cardiff Railway. These two saddle tanks were the only two of their class ever built and are a little different from its other Didcot shed mates. The most obvious from the outside is the valve gear. The rods and links take a decidedly ‘left turn at Albuquerque’ and end up going over the top of the running plate. This is quite unusual and is known as Kitson-Hawthorn valve gear. The engines were replacements for older machines and were slotted into the C.R. numbers 5 and 6. These engines went about their business until interrupted by the grouping of 1923 when the C.R. became the smallest absorbed railway.

1338's unusual Kitson-Hawthorn valve gear

They became G.W.R. Nos. 1338 and 1339 but the fates of these two machines could not be more different. No. 1339 was unceremoniously cut up for scrap in 1934. For some reason, No. 1338 was retained and put into store. It found itself on loan to Stewarts & Lloyds Ltd of Swansea during the first half of the second world war. She was returned in 1943 and then went on to work on Bridgwater Harbour from Taunton locomotive shed. And that's where she stayed until transferred to Swansea docks in 1960. She was the last of the absorbed standard gauge locos when she withdrawn from regular service in 1963. She accumulated no less than 340,000 miles in G.W.R. and B.R. service. When you think that was all generated on short shunting trips, you realise just how large a figure that is for such a small engine. Quite remarkable.

1338 at Bridgwater Docks. Photo by R C Riley

What is also quite remarkable is that she was saved from the fate that befell her classmate back in 1934. She was rescued from that in 1964 and became one of the prize exhibits at a small museum that was once housed at Bleadon and Uphill station in Somerset where she inhabited a space behind the up platform. Gradually disguised by bushes from the passing trains over the years, she eventually made her way to Didcot in 1987. She was subsequently restored to working order and had a good run, even making it out and about during her ticket taking in a visit to the Bristol Harbour Railway in 2000. She was (still is!) immensely popular with visitors - just like Trojan is. Her diminutive stature makes her less intimidating to younger steam fans, hopefully starting them on a lifelong fascination with the iron horses of yesterday. She is the only surviving Cardiff Railway engine and is incredibly important because of that too. For now, her boiler ticket has ended and she awaits her turn in the works. It seems that this indomitable little engine is taking a rest for now but don't count her out. The itch to add to those 340,000 miles can't be ignored forever...

Although not currently in working order, 1338 is still cared for by the team of volunteers at Didcot

PS: While we broke the 50 ‘Going Loco’ blogs in total a few issues back (has it REALLY been over a year now?!), this is the 50th that your regular blogger has had a hand in to a greater or lesser extent. While I get to scribble down the stuff in my head for you all to read once a week, it's the team that makes it look good so thanks to:

Leigh & Ali - Fact Checkers Extraordinaire.

Frank - Photo & Caption Wrangler

Kevin - Keeper of the Drawings Dungeon

Chrissy & Graham - Blog Construction Maestros

All the best.

Drew

50 Not Out! Drew, your regular blogger, is clearly going nowhere!


FRIDAY 7 MAY

No. 1466 - The Pioneer’s Progress

Your regular blogger gets a week off! Yay! Our guest today is Phil Morrell who has the privilege of looking after arguably the most important engine we have. The collection wouldn't be here if it wasn't for the purchase of No. 1466! He took up the reins as project manager in September and has prepared a short update on how things are going. I'm handing over to Phil and I'm going to put the kettle on...

1466 at Taunton shed in 1964, prior to her purchase by the Great Western Society

No. 1466 is currently being overhauled by Western Steam Engineering Limited (WSEL) at the Dean Forest Railway and this is set to be the most extensive overhaul the locomotive has had since 1961.

Despite the difficulty and uncertainty that Covid-19 brought to the world, there has been a great deal of progress made on the engine. As well as me taking on the role of project manager, I'm pleased and also very grateful that we have Bob Meanley on board as technical adviser for the project and a valued mentor. What Bob doesn't know about steam locomotives, quite frankly isn't worth knowing!

1466 and 1369 October 1965

1466 Rewheeled - photo courtesy of Ed Freeman

At the end of February, after the completion of horn grinding and having the axle-boxes overhauled, it's great to report that No. 1466 is now sat back on its wheels. The wheels themselves have been extensively refurbished too, having new tyres fitted by South Devon Railway Engineering (SDRE). No. 1466 has had a brand-new bunker made as well as having both side tanks extensively overhauled with a lot of new platework. This effectively makes them as good as new. The cab roof has also been restored and refitted to the locomotive temporarily to provide space so that other work can continue. The locomotive's inside valve motion has been overhauled and machined or replaced where necessary. There is a whole host of other work that has been completed which includes:

The overhaul of the rear drag-box.

  1. The new steel cab floor has been made.
  2. The piston rods have been successfully MPI tested and refitted.
  3. The locomotive's springs have been refurbished.
  4. The front sander linkage has been repaired.
  5. And finally(!), the front buffer beam has been refitted as well as all the buffers and drawgear to both ends.

Front bufferbeam - photo courtesy Phil Morrell

As the locomotive's smokebox was found to be in a rather dire condition, a new barrel has been sourced as well as a new door and various other smokebox fittings which have been manufactured and supplied by SDRE. Moving forward, the next stage is to make the locomotive into a complete rolling chassis with all its motion, lubrication and vacuum systems along with their associated pipework and fittings. Once this stage is completed, our focus will then turn to the final elephant in the room - the boiler. As the elephant metaphor rather nicely mirrors, this will be quite a big job...

The boiler awaits the fitting of new platework - photo courtesy Phil Morrell

The boiler needs the front tubeplate and front barrel section replacing, which have already been sourced and manufactured. At the firebox end, about three quarters of the backplate will be replaced. About 12 inches of outer wrapper on both sides will also be replaced along the bottom of the foundation ring and the bottom 12 inches of throatplate. Of course it will also need the usual replacement of a number of side stays, crown stays and new tubes. Once the pressure vessel pachyderm has been laid to rest, we will be ‘on the home straight’ for finishing the locomotive. It is hoped that she will make a triumphant return back to Didcot later this alongside No. 4079 Pendennis Castle (scroll down to the 23 April blog for details). This overhaul should see 1466's future secured for a long time to come.

Thanks Phil! I can't wait to have these two engines back in traffic. The first engine in the Great Western Society Collection AND the first ever guest engine to a Society event. I'd better get the Castle team fired up (pun intended!). Is it possible to do a special double header with these two on the main demonstration line? Can we get all three autocoaches working with No. 1466? Which one will have the best place for the driver and fireman to heat their Cornish pasties in the cab? Find out answers to these important questions and more in future thrilling editions of Going Loco - The Blog!

Blimey, that was a bit much.

I need another cuppa...

Some funding is still needed to help complete this thorough restoration – you can donate online via the Diamond Jubilee Fund.

1466 in action at Didcot Halt - photo courtesy Frank Dumbleton

  

 

Didcot Railway Centre Newsletter

Stay up to date with events and what's going on at Didcot Railway Centre.
You may unsubscribe at any time. We do not share your data with 3rd parties.

Subscribe

Make A Donation

Click To Donate